Additional Options

Click on the Button below for,

Accessories

Adhesives

Battery leads

Chargers

Connectors

EDF Units

Engines  

EP Planes

E Motors

Helicopters

IC Planes

Lipos

Props

Servos

Servo Leads.

Speed Controllers.

 Silicon Wire

Spinners

Switches

 

Cool Text: Logo and Graphics Generator

Futaba switches.

_____________________


Futaba style switch harness with charge lead.

£2.25(In stock)


______________________________________________

Futaba style heavy duty switch harness with a built in charge socket and sliding cover.

 £4.50 In Stock.


______________________________________________

Futaba style heavy duty switch harness with a built in charge socket and sliding cover.

NEW DYS Fail Safe.

1.Features
dys Fail safe to suit all nitro & petrol powered vehicles, helps prevent runaway vehicles (boats, cars etc) due to signal loss & low battery.
Specs:
1.Weight: 5g 
2.Working volts: 4.8V-6V
3.Loading current: 7mA(4.8V)
4.Precision scope: <0.3%
5.Dimension: 40mm x 21mm x 8.5mm

Features:
Low battery warning.
Prevents accidents by detection low battery voltage, low radio battery voltage, no radio signal, and signal interference.
Stops vehicle by applying brake servo.
Compatible with 4.8V-6V receiver power source.

Requires: Connect fail-safe unit to throttle/brake servo and receiver.
Auxiliary safety device that constantly checks the pulse signal from the receiver by means of a CPU and turns on a fail safe (F/S) function if the pulse is disturbed by interference. When the power supply voltage drops, a battery fail (B-F/S) function
Compact and lightweight design does not affect servo performance.
Response quickly to erroneous operation by interference, etc, and prevents loss of control of R/C models. Quick recall function quickly resets the F/S function by normal servo output signal from the receiver when the interference, etc. disappears.

Fail-Safe Break Setup
A.Connect the fail-safe unit to throttle/brake servo and receiver. Be sure to observe the polarity of the wire leads.
B.Connect to transmitter power turn on transmitter, and now you¡¯ll see FS green LED lighting, it indicates that the signal is input, servo which connect to FS will receive the signal while operating Transmitter.
C.Push the throttler make servo move to idea position, pushing FS Input signal botton, release while red LED sparking 3 times, then it indicates FS has recorded the signal.
D.Turn off transmitter power, and now you¡¯ll see FS green LED went out, while red LED is sparking, Servo is moving to the position which set before.
E.Re-urn on tr

 Fail Safe £4.50 (In Stock)

JR and Spectrum switches.

____________________

JR/spectrum style switch harness with charge lead.

£2.25(In stock)


___________________________________________

JR/spectrum heavy duty style switch harness with charge lead.

£3.80 (In Stock)

__________________________________________

JR/Spektrum style heavy duty switch harness with a built in charge socket and sliding cover.


£4.00 (In Stock)


_____________________________________

Make a Free Website with Yola.